Savezombies.com

It is time we stand up for equal rights!!
 
HomeFAQSearchRegisterLog in

Share | 
 

 gelatine prosthetics

View previous topic View next topic Go down 
AuthorMessage
Bob~
The Leader!
avatar

Number of posts : 437
Age : 40
Location : Indiania
Registration date : 2008-05-04

PostSubject: gelatine prosthetics   Tue May 13, 2008 11:53 am

Warning:For this technique, the Gelatine needs to be hot. When hot, gelatine is not unlike molten plastic. If it gets on your skin it will scald and burn without coming off. Needless to say, eye protection must be worn.



Always wanted to know how to cast foamed gelatine moulds without scalding yourself? We've an online step-by-step howto on perfecting Gelatine prosthetics for face and body.

Basic Method


Start by preparing a geletin base. Remember we will be foaming it, so you do not need to make the same volume of gelatine as your prosthetic...assume roughly half
Now that your gelatine base has cooled, you should see that the material itself is quite solid and heavy, and though pliable it's never really in a workable state at any point of the heating/cooling phases.
In order to make prosthetics and effects that are light enough to stay on your skin, we will 'foam' the gelatine, using the same basic process as in a science-fair volcano.
Ideally for this, we want to introduce as little liquid as possible, as the more water there is in the gelatine, the more it will collapse and degrade. But, as powdered acidics are less likely to be found in your average house, vinegar can be perfectly effective for small quantities of foamed gelatine. If preparing larger quantities I would recommend acquiring powdered citric acid or tartaric acid.

Still,using vinegar in my tests, You can prepared prosthetics a couple of weeks in advance they survive admirably in the fridge.
So take your base, and heat it in the microwave for 20 seconds; if this is not enough time to melt the gelatine, do small extra bursts of 10 seconds rather than a long heating. Do not let it get too hot or it will break down and become useless, as well as turning into a superheated liquid of doom.
Add the color (acrylic paint) if you did not already at the base stage, and the bicarbonate of soda (Baking soda) and stir it in thoroughly. You will get a small amount of reaction usually at this stage so you want to act quickly (as the gelatine is cooling as well). So, add the vinegar (less than a teaspoon is fine for small quantities of latex, but you can adjust depending on how much foam you want. The reaction will begin immediately, so quickly stir to mix the ingredients evenly.
You can now spoon the foam into premade moulds, or use tools to create prosthetics by hand, though you have to work quickly with it as it cools rapidly.
Foamed gelatin does not keep well, as reheating it will 'de-foam' it to some extent, and the more foaming ingredients you add the less stable the foam becomes. Because of this it is best to only do as much as you need as and when you need it.
Back to top Go down
View user profile http://savezombies.com
 
gelatine prosthetics
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Savezombies.com :: Offical site news :: Zombie how-tos and such-
Jump to: