Savezombies.com

It is time we stand up for equal rights!!
 
HomeFAQSearchRegisterLog in

Share | 
 

 Basic Gelatin Skin

View previous topic View next topic Go down 
AuthorMessage
Bob~
The Leader!
avatar

Number of posts : 437
Age : 40
Location : Indiania
Registration date : 2008-05-04

PostSubject: Basic Gelatin Skin   Tue May 13, 2008 12:08 pm


Basic Method

Start by preparing your gelatin, as per the instructions for a gelatin base.
Put some cooking oil onto a paper towel and apply very thinly to your plate / tray. Wipe off any excess. Place the plate in a warm oven (250 degrees), until it is warm (but not hot) to the touch. The reason to use a plate not a tray is that China retains its heat longer than metal. The reason we do not want the plate to be hot is that gelatin 'denatures' or becomes useless above a certain temperature.
Pour a small amount of liquid gelatin onto the warm plate. If you get any on your skin, immediately put the area under a cold tap. Tipping the plate, try to spread the gelatin as thinly as possible. The warm plate should help keep it liquid. You may have some success using a hairdryer to 'blow' the gelatin flat.

Once you are happy that the gelatin is as thin as you want, place the plate on ice to cool it quickly. Note: Do not just stick the plate in the freezer. The heat will melt any food it comes near, which is not a good idea.
When it is cooled, you should be able to peel the sheets off the plate, though care should be taken with the very thin edges, as these can be the most useful part for seamless application.
You can store sheets of gelatin between layers of greaseproof paper in the freezer. store for up to 6 months and good as new when thawed .

Sheets of gelatin can be used to create lengthy gashes, as you can easily manipulate them with a knife. They can be applied to the skin for temporary purposes just by (gently) heating with a warm hairdryer, though this technique will often not hold long. A thin layer of liquid latex will hold it happily in place for longer terms. Better still though is to use Spirit Gum. With this, you apply the gum to the area, and wait until it is tacky to the touch, then carefully place the gelatin in place. To remove this you will need spirit gum remover (or mineral oil/baby oil).
Techniques: covering[/size]
One of the nice aspects of working with sheets of gelatin is that you can use it to cover other things, allowing you to 'build' underneath before applying the 'skin'. So for example you could place maggots on the skin, then only stick the gelatin to the skin around the maggots. Then cut through the gelatin across the 'maggot' area, and you have a wound with maggots in. This would be more difficult with latex skin techniques. See below for a tip to improve this effect.
Techniques: coloring

The technique above will give you transparent skin sheets. This is very useful for seamlessly applying onto skin, but if it is not directly over your skin (e.g. flaps, covering other things etc), you want it to be opaque, and preferably match your skin tone.
The best method I have heard for this is using cheapo acrylic paint, which you can buy in myriad colors often in small $1 tubes. Literally a drop or two of this in your gelatin mixture will easily mix in, and you can create excellent realistic skin of any tone that can be peeled and more.
Back to top Go down
View user profile http://savezombies.com
 
Basic Gelatin Skin
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Six basic tenets of Dow theory
» Fight aging skin with Green Coffee Bean Oil (Extracts)
» LOLC & People's Leasing News
» Stock Trading - Beyond Basics
» Lets discuss - This is How world Top CEO are paid

Permissions in this forum:You cannot reply to topics in this forum
Savezombies.com :: Offical site news :: Zombie how-tos and such-
Jump to: